Uploading CAS Files

The CAS files contain the CAS Protocol definitions that are used for CAS-terminated trunks. You can use the supplied CAS files or create your own files. You can upload up to eight files to the device. You can assign different files to different trunks (CASTableIndex_x), and different CAS tables to different B-channels (CASChannelIndex) in the Trunk Settings page (see Configuring Trunk Settings).

All CAS files that are uploaded together must belong to the same trunk type (i.e., either E1 or T1).

➢ To upload a CAS file:
1. Open the Auxiliary Files page (see Uploading Auxiliary Files through Web Interface).
2. Under the CAS file group, click the Choose File button (or Browse button, depending on browser) to select the file from a folder on your computer, and then click Load File:

3. On the toolbar, click Save for your settings to take effect.